Ingenico Re-Initialization Instructions: iCT250, iWL220, iWL255

November 5, 2015

moneris-initialization

How to: Initialization Instructions for Moneris Ingenico terminals (iCT250, iWL220, iWL255)

These instructions will guide you through the proper steps to properly initialize your Moneris terminal. 

From the READY screen:

1. Press the  (#) key. 
The MAIN MENU appears.

moneris-initialization-ingenico

2. Scroll down to CONFIGURATION, and press the  (Green button) key. 
The CONFIG FUNCS menu appears.

moneris-initialization-ingenico-ict250

3. Press the  (Green Button) key to select INITIALIZATION.

ingenico-initialization

If the SWIPE ADMIN CARD prompt appears instead, swipe the POS Admin card.

moneris-ingenico-initialization

If the RETAIN CURRENT MERCH SETTINGS? prompt appears, press the  (Top Left “–“ button) key to select YES.
IMPORTANT: DO NOT select NO unless instructed to do so by a Moneris Service Centre representative.

If the MERCHANT ID entry screen appears, press the  (Green Button) key.

If the PHONE NUMBER entry screen appears, press the  (Green Button) key. 

4. Please wait while the terminal communicates with the Moneris Host. This may take a few minutes. (If attached, the external PINpad displays WELCOME/BONJOUR during the Re-initialization.

If SWIPE ADMIN CARD appears, swipe the POS Admin card.

Previous Article
Verifone Re-Initialization Instructions: Vx520, Vx810, Vx820
Verifone Re-Initialization Instructions: Vx520, Vx810, Vx820

How to: These instructions will guide you through the proper steps to properly initialize your Moneris Veri...

Next Article
A Missing Interac Debit Transaction
A Missing Interac Debit Transaction

Most dropped Interac debit transactions are automatically reprocessed by Moneris. Here’s a sample view of w...

×

Subscribe to our Insights Blog.

First Name
!
Thank you!
Error - something went wrong!